حلقة نقاشية ( سيمنار ) في قسم الهندسة المدنية              حلقة نقاشية ( سيمنار ) في قسم هندسة السدود والموارد المائية              أهلا وسهلا بالطلبة الجدد في كلية الهندسة              السيد رئيس جامعة الأنبار يزور كلية الهندسة ويلتقي بالهيئة التدريسية في الكلية              السيد رئيس جامعة الأنبار يفتتح مبنى عمادة كلية الهندسة بعد إعادة تأهيلها وإعمارها

 البحوث المنشورة
 

Name
Hamdi Emaduldeen Ahmed Hamdi
Department
Mechanical Engineering
E-mail:
Publications
1.      Hamdi E. Ahmed, Mirghani I. Ahmed, Thermal performance of annulus with its applications; A review, Renewable and Sustainable Energy Reviews, 71 (2017) 170–190.
2.      Hamdi E. Ahmed, M.Z. Yusoff, M.N.A. Hawlader, M.I. Ahmed, B.H. Salman, A.Sh. Kerbeet, Turbulent heat transfer and nanofluid flow in a triangular duct with vortex generators, International Journal of Heat and Mass Transfer 105 (2017) 495–504.
3.      A. Sh. Kherbeet, H.A. Mohammed, Hamdi E. Ahmed, B.H. Salmand, Omer A. Alawi, Mohammad Reza Safaei, M.T. Khazaal, Mixed convection nanofluid flow over microscale forward-facing step­–Effect of inclination and step heights, International Communications in Heat and Mass Transfer 78 (2016) 145–154.
4.      Hamdi E. Ahmed, Optimization of thermal design of ribbed flat-plate fin heat sink, Applied Thermal Engineering 102 (2016) 1422–1432.
5.      A.Sh. Kherbeet, Mohammad R. Safaei, H.A. Mohammed, B.H. Salman, Hamdi E. Ahmed, et al., Heat transfer and fluid flow over microscale backward and forward facing step: A review, International Communications in Heat and Mass Transfer 76 (2016) 237–244.
6.      B.H. Salman, H. A. Mohammed, A. SH. Kherbeet Hamdi E. Ahmed, The effect of geometrical parameters on enhancing the heat transfer inside a microtube, International Journal of Heat and Technology33(3) (2015) 7984.
7.      A.Sh. Kherbeet, H.A. Mohammed, B.H. Salman, Hamdi E. Ahmed, Omer A. Alawi, M.M. Rashidi, Experimental study of nanofluid flow and heat transfer over microscale backward- and forward-facing steps. Experimental Thermal and Fluid Science 65, (2015)13–21.
8.      Hamdi E. Ahmed, M. Z. Yusoff, M.N.A. Hawlader, M.I. Ahmed, Turbulent Two-Phase Model and Heat Transfer in a Triangular Duct: Effect of Nanofluids and Vortex Generators. International Journal of Heat and Mass Transfer 105 (2017) 495–504.
9.      Hamdi E. Ahmed, Mirghani I. Ahmed, Optimum Thermal Design of Triangular, Trapezoidal and Rectangular Grooved Microchannels Heat Sinks, International Communication in Heat and Mass transfer, 66 (2015) 47–57.
10. Hamdi E. Ahmed, M.I. Ahmed, Thermal Performance of Annulus with its Applications; A review. Renewable and Sustainable Energy Reviews, Volume 71, May (2017), Pages 170–190.
11. Hamdi E. Ahmed, M.Z. Yusoff, N.H. Saeid, Thermal Enhancement of Triangular Ducts Using Compound of Vortex Generators and Nanofluid. Journal of Heat Transfer Engineering, (2017) (accepted).
12. Hamdi E. Ahmed, M.Z. Yusoff, M.N.A. Hawlader, M.I. Ahmed, Experimental Study of Heat Transfer Augmentation in a Triangular Duct Using Combined Nanofluids and Vortex Generator. International Journal of Heat and Mass Transfer, 90 (2015) 1197–1206.
13. Hamdi E. Ahmed, M.Z. Yusoff, M.N.A. Hawlader, M.I. Ahmed, Heat Transfer Enhancement in a Triangular Duct using Compound Nanofluids and Turbulators. Applied Thermal Engineering, 91 (2015) 191–201.
14. Hamdi E. Ahmed, M.Z. Yusoff, M.N.A. Hawlader, M.I. Ahmed, Numerical and Experimental Comparative study on Turbulent Nanofluids Flow and Heat Transfer in a Ribbed Triangular Duct. Experimental Heat Transfer, 25 Nov (2015), http://dx.doi.org/10.1080/08916152.2015.1113216.

 

 

 

 
Name: Prof. Dr. Abdulkadir Ismail Alhadithi
Department: Dams and water resources engineering.
Publications:
 
 Ibrahim H. Alfahdawi, S. A. Osman, R. Hamid, Abdulkader Ismail Al-Hadithi, Utilizing Waste Plastic Polypropylene And Polyethylene Terephthalate As Alternative Aggregates To Produce Lightweight Concrete: A Review, Journal of Engineering Science and Technology Vol. 11, No. 8 (2016) 1165 – 1173.
 
Abdulkader Ismail Al-Hadithi, Nahla NajiHilal, The possibility of enhancing some properties of self-compacting  concrete by adding waste plastic fibers, Journal of Building Engineering 8 (2016) 20–28.
 
 
 
 
 
Name: Ahmed  Tareq Noaman
 
 
Department: Dams and Water Resources Engineering
 
 
Publication:

Ahmed Tareq Noaman, B.H. Abu Bakar, Hazizan Md. Akil, A.H. Alani, Fracture characteristics of plain and steel fibre reinforced rubberized concrete, Construction and Building Materials, Volume 152, October 2017, Pages 414-423.



Amer J. Al-ani
PhD of Thermofluids
 
Publications
1.     Heat Transfer and Airflow Characteristics Enhancement of Compact Plate-Pin Fins Heat Sinks – A Review, 2017
Propulsion and Power Research Journal,
2.     A Numerical Investigation of the Thermal-Hydraulic Characteristics of Perforated Plate Fin Heat Sinks, 2017
International Journal of Thermal Sciences, 121: 266-277.
3.     Experimental evaluation of an unglazed solar air collector for building space heating in Iraq, 2017
Renewable Energy Journal, 112: 498–509.
4.     Effect of temperature-dependent air properties on the accuracy of numerical simulations of thermal airflows over pinned heat sinks, 2016
International Communications in Heat and Mass Transfer Journal, 78: 163-167.
5.     Effect of Different Perforations Shapes on the Thermal-hydraulic Performance of Perforated Pinned Heat Sinks, 2016
International Journal of Multidisciplinary Engineering Science and Technology, 4 (3): 4475–4480, 2016
6.     A Numerical Investigation of Thermal Airflows over Strip Fin Heat Sinks, 2016

International Communications in Heat and Mass Transfer Journal, 75: 183–191, 2016

7.     Computational Design and Optimisation of Pin Fin Heat Sinks with Rectangular Perforations, 2016

Applied Thermal Engineering Journal, 105: 691-703, 2016.

8.     An Experimental and Computational Investigation of Thermal Air Flows through Perforated Pin Heat Sinks, 2015

Applied Thermal Engineering Journal, 89: 365–376, 2015

9.     Groove Geometry Effects on Turbulent Heat Transfer and Fluid Flow, 2013

 Heat and Mass Transfer Journal, Springer, 49 (2): 185–195, 2013.

10.Study of the Performance Thermal Forced Unglazed Solar Air Collector, 2012

Anbar Journal for Engineering Science, 5 (2):311-332, 2012.

11.Heat Transfer and Fluid Flow Characteristic in Banks Flat Tubes, 2011

Tikrit Journal of Engineering Sciences, 18 (4):88-103, 2011.

12.Natural Convection Heat Transfer in Horizontal Concentric Annulus between Outer Cylinder and Inner Flat Tube, 2010

Anbar Journal for Engineering Sciences, 3 (2):31-45, 2010.

13.Effect of Absorber Surface Shape on the Forced Thermal Convection of Solar Air Collectors, 2010

Al-Qadisiya Journal for Engineering Sciences, 3 (1):1-18, 2010.

14.Mini Manual Air Conditioning & Refrigeration Systems, 2010

Mechanical Engineering Department, University of Anbar, September 2010.

15.Temperature distribution and Behaviour of Air inside Solar Chimney with Different Aspect Ratio, 2009

Al-Maaref University College Journal, 2009.

 

Mohammed Abed Ahmed
PhD of Thermofluids

mohammed.abed@uoanbar.edu.iq, dr.mohaad@gmail.com

 
Publications
 
1.     Mohammed Abed Ahmed "Numerical Study of Turbulent Thermal-hydraulic Performance of Al2O3-Water Nanofluid in Channel with Triangular Baffles”, Anbar Journal for Engineering Sciences © AJES,Vol. ,No. , 2016.
 
2.     M.A. Ahmed, M.Z. Yusoff, K.C. Ng, N.H. Shuaib, “Numerical investigations on the turbulent forced convection of nanofluids flow in a triangular-corrugated channel” Case Studies in Thermal Engineering6 (2015) 212-225.
 
3.     M.A. Ahmed, M.Z. Yusoff, K.C. Ng, N.H. Shuaib, " Numerical and experimental investigations on the heat transfer enhancement in corrugated channels using SiO2-water nanofluid," Case Studies in Thermal Engineering 6 (2015) 77-92.
 
4.     M.A. Ahmed, M.Z. Yusoff, K.C. Ng, N.H. Shuaib, " The effects of wavy-wall phase shift on thermal-hydraulic performance of Al2O3-water nanofluid flow in sinusoidal-wavy channel," Case Studies in Thermal Engineering 4 (2014) 153-165.
 
5.     M.A. Ahmed, M.Z. Yusoff, N.H. Shuaib (2014). Numerical Investigation on the
Nanofluid   Flow   and   Heat   Transfer   in   a   Wavy   Channel,   Ku   Shaari,   Ku
Zilati, Awang, Mokhtar (Eds.), Engineering Applications of Computational Fluid
Dynamics (Book chapter). Germany: Springer.
 
6.     M. A. Ahmed, N.H. Shuaib, M. Z. Yusoff, “Effects of geometrical parameters on the flow and heat transfer characteristics in trapezoidal-corrugated channel using nanofluid,” International Communication in Heat and Mass Transfer 42 (2013) 69-74. (ISI/SCOPUS-Cited Publications-Impact Factor: 2.208- Q1.
 
7.     M.A.  Ahmed,  M.Z.  Yusoff,  N.H.  Shuaib,  K.C.  Ng,  "A  numerical  study  of  laminar forced convection flow of Al2O3-water nanofluid in triangular-corrugated channel,"  IOP  Conference  Series:  Earth  and  Environmental  Science  16  (2013).
 
8.     M. A. Ahmed, N.H. Shuaib, M. Z. Yusoff, “Numerical investigations on the heat transfer enhancement in a wavy channel using nanofluid,” International Journal of Heat and Mass Transfer 55 (2012) 5891-5898. (ISI/SCOPUS-Cited Publications-Impact Factor: 2.315- Q1.
 
 
9.     M. A. Ahmed, N.H. Shuaib, M. Z. Yusoff, A.H. Al-Falahi, Numerical investigations of flow and heat transfer enhancement in a corrugated channel using nanofluid, Int. Communication in Heat and Mass Transfer 38 (2011) 1368-1375. (ISI/SCOPUS-Cited Publications-Impact Factor: 2.208- Q1
 
10. Waleed M. Abed & Mohammed A. Ahmed “ Numerical Study of Laminar Forced Convection Heat Transfer and Fluid Flow Characteristics in a Corrugated Channel”, Journal of science & Engineering, AL-Mustansiriya University, College of Engineering, 2010
 

11. Jalal M. Jalil, Qasim S. Mehdi & Mohammed A. Ahmed “Numerical Study of Laminar Mixed Convection Heat Transfer for Flow Over Fixed and Rotated Cylinder”, The University of Jordan, Vol.37, No.1,  2010.

 
 
12. Jalal M. Jalil, Qasim S. Mehdi & Mohammed A. Ahmed, “ On The Effect of Flow Direction on Mixed Convection Around Heated Circular Cylinder”, Engineering & Technology Journal, Vol.27, No.7, 2009.
 
13. Waleed M. Abed & Mohammed A. Ahmed “Numerical Study of Natural Convection in Horizontal Eccentric Annulus”, Anbar Journal for Engineering Sciences© AJES, Vol.1,No.2, 2008.
 
14. Mohammed A. Ahmed “Aiding and Opposing Mixed Convection From an Array of Circular Cylinder in a  Saturated Porous Medium”, Anbar Journal for Engineering Sciences © AJES,Vol.1,No.2, 2008.
 
15.  Mohammed A. Ahmed “On The Effect of Flow Direction on Mixed Convection from a  Horizontal Cylinder in a  Saturated Porous Medium”, Anbar Journal for Engineering Sciences © AJES,Vol.1,No.1, 2007.
 
 
 
 
 
 
 
الاسم الثلاثي: وليد محمد عبد
اللقب العلمي: استاذ مساعد
الشهادة: دكتوراه
الجامعة: الانبار
الكلیة: الهندسة
الاختصاص العام: هندسة ميكانيكية
الاختصاص الدقیق: قدرة
 

تفاصيل البحوث

1.    اسم البحث بالانكليزي

Numerical and experimental investigation of heat transfer and fluid flow characteristics in a micro-scale serpentine channel

البحث (منشور او مقبول النشر او غير منشور)
: منشور

اسم المجلة تذكر للبحث المنشور والمقبول النشر:

International Journal of Heat and Mass Transfer

العدد يذكر للمنشور:

Vol. 88, pp.790–802

تاريخ النشر: 2015

الدوله التي صدر منه النشر: الولايات المتحدة الامريكية

 

2.    اسم البحث بالانكليزي 


Enhancing heat transfer at the micro-scale using elastic turbulence

البحث (منشور او مقبول النشر او غير منشور)
: منشور

اسم المجلة تذكر للبحث المنشور والمقبول النشر:

Theoretical & Applied Mechanics Letters

العدد يذكر للمنشور:

Letters 5, pp. 103-106

تاريخ النشر: 2015

الدوله التي صدر منه النشر: الولايات المتحدة الامريكية

3.    اسم البحث بالانكليزي 


Experimental investigation of the impact of elastic turbulence on heat transfer in a serpentine channel

البحث (منشور او مقبول النشر او غير منشور)
: منشور

اسم المجلة تذكر للبحث المنشور والمقبول النشر:
Journal of Non-Newtonian Fluid Mechanics
العدد يذكر للمنشور:

Vol. 231, pp. 68–78

تاريخ النشر: 2016

الدوله التي صدر منه النشر: الولايات المتحدة الامريكية

 

4.    اسم البحث بالانكليزي

Heat transfer enhancement in a cross-slot micro-geometry

البحث (منشور او مقبول النشر او غير منشور)
: منشور

اسم المجلة تذكر للبحث المنشور والمقبول النشر:
International Journal of Thermal Sciences
العدد يذكر للمنشور:

Vol. 121, pp. 249–265

تاريخ النشر: 2017

الدوله التي صدر منه النشر: الولايات المتحدة الامريكية

 
 

خريجي الكلية

القسم
الشهادة
السنة
النوع
الجنس
الاسم

الاساتذة والاداريين


القسم
اللقب
الاسم


طلبة الكلية

القسم
المرحلة
الشهادة
النوع
الجنس
الاسم