1. Abdulkader Ismail Al-Hadithi, Ibrahim A.S.Al-Jumaily and Bayan S.Al-Nu'man,“Mechanical Properties of No-Fines Polymer Concrete”. 1st Iraqi Conference of Civil Engineering .20-22/2/2001,Al-Anbar,Iraq. Published in the Iraqi Journal for Civil Engineering, special issue 2, September 2001.
2. Abdulkader Ismail Al-Hadithi, Ibrahim A.S.Al-Jumaily and Bayan S.Al-Nu'man, “Some Properties of No-Fines Polymer Concrete” . 6th International Conference of Concrete Technology in Development Countries, Amman-Jordan-21-24/10/2002.
3. Abdulkader Ismail Al-Hadithi, Bayan S. Al-Nu'man and Ayad A.Sleby, “Sawdust Concrete and Its Mechanical Properties”. Iraqi Journal of Civil Engineering, 5th issue, March 2004, pp:27-45.
4. Al-Hadithi, Abdulkader Ismail , “Influence of Increasing Water:Cement Ratio on Concrete Containing Low Content of Polymer”. Iraqi Journal  of Civil Engineering, 6th issue, June 2005, pp:25-36.
5. Abdulkader Ismail Al-Hadithi, Khalid Battal Najim and Tariq A. Thaker, "Beahaviour of No-Fines Reinforced Polymer-Modified Concrete Beams".  Iraqi Journal of Civil Engineering, 8th issue, June 2007, pp:1-15.

6. Abdulkader Ismail Al-Hadithi, Bayan S. Al-Nu'man,“Some Properties of  No-Fines Polymer Concrete Hollow Blocks” . Journal of Engineering and Development, Vol.(11), No (3), December 2007. pp(1-13).
7. Khalid R. Mahmood Al-Janabi and Abdulkader I. Abdulwahab Al-Hadithi,"Modeling of Polymer Modified Concrete Strength with Artificial Neural Networks".  Iraqi Journal of Civil Engineering, 10th issue, March 2008, pp: 47-68.
8. Abdulkader Ismail Al-Hadithi and Bayan S. Al-Nu'man,"Behaviour of Polymer Modified Concrete Slabs under Impact".Iraqi Journal of Civil Engineering, 11th issue, June 2008.pp:1-24.
9. Abdulkader Ismail Al-Hadithi, Bayan S. Al-Nu'man, ,“Flexural Behaviour of Polymer Modified Reinforced Concrete Beams". Journal of Engineering and Development, Vol 13, No1, March(2009). pp(89-109).
10. Al-Hadithi, Abdulkader Ismail, “Some Properties of Concrete Using Waste Plastic Fiber with a Very Small Percentages”. The First International Engineering Sciences Conference of Aleppo University (IESC"2008). 2-4/11/2008,Aleppo,Syria.
11. Abdulkader Ismail Al-Hadithi and Sheelan M. Hama Al - Barazanji , “Some Mechanical Properties of Polymer Modified Concrete Reinforced with a Waste Plastic Fiber”.First Scientific Conference of College of Engineering ,Babylon University -  17-18 MAY 2009, Babylon, Iraq. Published in the Iraqi Journal of Mechanical And Materials Engineering, Special Issue for the Paper Presented at the 1st Annual Scientific Conference of the College of Engineering 17-18 May 2009, Part (D).pp:635-646.
12. Abdulkader Ismail Al-Hadithi and, Ghassan S. Jameel Al-Kubaysi, "Mechanical  Properties of Fiber Concrete Containing Acrylic Polymer".Second Annual Scientific Conference of College of Engineering ,Babylon University  24-25 February 2010, Babylon, Iraq.Published in the Iraqi Journal of Mechanical And Material Engineering, Special Issue for the Paper Presented in 2nd  Annual Scientific Conference of the College of Engineering 24-25 March 2010, Part (D).pp(46-61).
13. Abdulkader Ismail Al-Hadithi and, Ahmed Tareq Al-Ejbari, "Study Some Properties of Concrete Containing Styrobore", Second Annual Scientific Conference of College of Engineering ,Babylon University  24-25 February 2010, Babylon, Iraq. Published in the Iraqi Journal of Mechanical And Material Engineering, Special Issue for the Paper Presented in 2nd  Annual Scientific Conference of the College of Engineering 24-25 March 2010, Part (E).pp(61-68).
14. Abdulkader Ismail Al-Hadithi ; Ahmed Tareq Al-Ejbari and Ghassan S.Jamil, “Behaviour of Waste Fiber Concrete Slabs Under Low Velocity Impact”. Iraqi Journal of Civil Engineering. Volume (9), Issue No.(1), 2013 ,pp:135-148.
15. Abdulkader Ismail Al-Hadithi, Ahmed Tariq Al-Ejbary, Mahmmod K. Al-Ani, "Study Some Properties of Concrete Containing Industrial Styrobore and Modified by Polymer",Accepted in the First Scientific Conference of College of Engineering, University of Anbar  November- 2011, Ramadi , Al-Anbar, Iraq.

16. Abdulkader Ismail Al-Hadithi, Ameer Abdulrahman Al- Dulaimy and Ahmed Tareq Al-Ejbari, "Behaviour of Reinforced Polymer Modified High Strength Concrete Slabs under Low Velocity Impact",First Scientific Conference of College of Engineering , University of Anbar  November- 2011, Ramadi ,Al-Anbar, Iraq.Published in ANBAR Journal for Engineering Sciences, Volume (5), Special Issue No. (2), 2012. pp:171-189.
17. Abdulkader Ismail Al-Hadithi and Bayan S. Al-Nu'man, "Improving the Mechanical Properties and Resistance to High Temperature of Concrete by Adding Styrene Butadiene Rubber (SBR) Polymer".The 5th Jordanian International Civil Engineering Conference /(JICEC’5),Amman-Jordan , 17-19 January, 2012.
18. Abdulkader Ismail Al-Hadithi, Khalil I. Aziz and Mohammed Tarrad N. Al-Dulaim. “Some Mechanical Properties of Ferro-Cement Slabs Modified by Polymer”. International Conference on Green Technology & Ecosystems for Global Sustainable Development 2012 (ICGTEC2012), which held on 28th - 30th MAY 2012 ; UNIVERSITY OF TUZLA, BOSNIA AND ERZEGOVINA.
19. Abdulkader Ismail Al-Hadithi and Ghassan S. Jameel Al-Kubaysi.  “The Effects of Adding Acrylic Polymer on Some Mechanical Properties and the Resistance to Elevated Temperatures of Fiber Reinforced Concrete”. 11th International Conference on Concrete  Engineering and Technology 2012 which held on 12 - 14 June 2012 at Kuala Lumpur.
20. Abdulkader Ismail Al-Hadithi, Dr.Ayad Abdul-Razzaq Mutar, BASHAR ABDULAZEEZ MAHMOOD, “Using of Poly Styrene Wastes in Concrete”, Published in the Proceeding of Second Scientific Conference for Pure Science , University of ANBAR, which held on 20th-22th Nov. 2012.
21. Abdulkader Ismail Al-Hadithi, Ibrahem Ahmed S. Al-Jumaily and Noor Salah Najim Al-Samarài:, “Mechanical Properties of Carbon Fiber Lightweight Aggregate Concrete Containing Acrylic Polymer” , ANBAR Journal for Engineering Sciences, Volume (6), No. (3), 2013. pp:358-373.
22. Abdulkader Ismail Al-Hadithi. , “Improving Impact and Mechanical Properties of Gap-Graded Concrete by Adding Waste Plastic Fibers”. Published in the International Journal of Civil Engineering and Technology (IJCIET). Volume 4, Issue 2, March - April (2013), pp. 118-131.
23. Abdulkader Ismail Al-Hadithi, Aseel M. Mohammed, Saif S. Mansour:,” The Possibility of Using Residues of Drink Bottles Making from Aluminum Composites as Aluminum Fibers to Produce Fiber Reinforced Concrete”. The International Conference to Achieve Sustainable Development in Iraq, University of Baghdad - Baghdad, IRAQ; 8-9/05/2013. Published in the of Association of Arab Univercities, Journal of Engineering Sciences , Special Issue 2013,pp:134-144.
24. Abdulkader Ismail Al-Hadithi, Khalil Ibrahim Aziz, Mohammed Tarrad Nawar Al-Dulaim. “BEHAVIOR OF FERRO-CEMENT SLABS MODIFID BY POLYMER UNDER LOW VELOCITY IMPACT”. Published in the International Conference on nano science, Engineering and Management (BOND21) which was held in 19-21 Aug. 2013 at Bayview Beach Resort, Batu Ferringhi Beach, Penang, Malaysia. Published in Advanced Materials Research Vol. 925 (2014) pp 3-7 © (2014) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/ AMR.925.3
25. Abdulkader Ismail Al-Hadithi, Valery S. Lesouik, Ahmed Anis Al-Ani,”The Effects of adding Carbon Fibers to the Concrete using Iraqi Raw Materials” ."?????????? ? ?????????? ???????? ?? ???????? ???????? ?????????? ????". Published in Scientific and Engineering Challenges of the Construction and Technological Recycling of Industrial Wastes . Belgorod State Technological University, Shukov, Belgorod , Russia. March, 2014.
26. Abdulkader Ismail Al-Hadithi, Ameer Abdulrahman Al-Dulaimy, Saeed Khalaf Rejib, ” Stress-strain relationship for steel-fiber reinforced polymer modified concrete under compression. Iraqi Journal of Civil Engineering. Vol.(10), Issue(1), 2016, pp:19-30.
27. Abdulkader Ismail Al-Hadithi, Adil N. Abed and Eng. ahmed Salie Mohammed, “The Effect of  Adding Waste Plastic Fibers on Engineering Properties of Roller Compacted Concrete”. Iraqi Journal of Civil Engineering. Vol.(10), Issue(1), 2014, pp:31-39.
28. Abdulkader Ismail Al-Hadithi, Khalil Ibrahim Aziz and Mohammed Tarrad Nawar Al-Dulaimi “ Behaviour of Ferrocement Slabs Containing SBR Under Impact Loads. International Journal of Sustainable and Green Energy,2015; 4(3-1): 34-50,Published online January 13, 2015.
29. Abdulkader Ismail Al-Hadithi and  Zayd Abdul-Jabbar Al-Obaidi,” BEHAVIOR OF FERROCEMENT SLABS CONTAINING WASTE PLASTIC FIBERS UNDER IMPACT LOADINGS’. Ciência e Técnica Vitivinícola Journal, 05/2015; 30(5):205-219.
30. Abdulkader Ismail Al-Hadithi,” THE EFFECTS OF ADDING WASTE PLASTIC FIBERS ON SOME MECHANICAL PROPERTIES OF GAP-GRADED CONCRETE CURING BY DRAINAGE WATER AND SEWAGE WATER”. The 10th Asia Pacific Conference on Sustainable Energy & Environmental Technologies (APCSEET 2015), University of Seoul, Korea.; 07/2015.
31. Abdulkader Ismail Al-Hadithi, Akram S. Mahmood, and Yasmin Abdul-Hameed, ”Experimental and Numerical Investigation on Shear Transfer of Concrete Specimens Strengthened with CFRP Sheets under Tensile Forces”, Al-Nahrain University- College of Engineering Journal;07/2015.
32. Abdulkader Ismail Al-Hadithi, Mahmood Fawzi Alani , “Mechanical Properties of High Performance Concrete Containing Waste Plastic as Aggregate”, Journal of Engineering, University of Baghdad, College of Engineering, Issue (8), Vol. (21), August 2015, pp:100-115.
33. Abdulkader Ismail Al-Hadithi and  Eng. Zayd Abdul-Jabbar Al-Obaidi, "The Possibility of Enhancing Some Mechanical Properties of Ferro-Cement Mortar by Waste Plastic Fibers". 1st International Conference on Engineering and Innovative Technology. Published in ZANCO Journal of Pure and Applied Sciences (The official scientific journal of Salahaddin University-Erbil ZJPAS), (2016) 28 (2); pp:470-476.
34. Abdulkader Ismail Al-Hadithi and Nahla Naji Hilal, ”The Possibility of Enhancing Some Properties of Self-Compacting Concrete by Adding Waste Plastic Fibers”, Journal of Building Engineering, Vol.(8), December 2016, pp:20-28.
35. Ibrahim H Alfahdawi, S A Osman, R Hamid and Abdulkader Ismail Al-hadithi, ”Utilizing waste plastic polypropylene and polyethylene terephthalate as alternative aggregates to produce lightweight concrete: A review”,Journal of Engineering Science and Technology, Vol. 11(8) August 2016.
36. Abdulkader Ismail Al-Hadithi, Waseem Khairi Mosleh Frhaan, " The Effects of Adding Waste Plastic Fibers (WPFs) on Some Properties of Self Compacting Concrete using Iraqi local Materials". Iraqi Journal of Civil Engineering. Vol.(11), Issue(1), 2017, pp:1-20.
37. Abdulkader Ismail Al-Hadithi, Shahad Younus Thabet Al-Waysi, "Mechanical Properties and Flexural Behavior of reinforced Polymer Modified Concrete beams enhanced by Waste Plastic Fibers (WPF)". Iraqi Journal of Civil Engineering. Vol.(11), Issue(2), 2017, pp:16-32.
38. Shamil K. Ahmed, Abdulkader Ismail Al-Hadithi, Saad J. Mohammed, " Producing of eco-friendly lightweight concrete using waste polystyrene particles as aggregates with adding waste plastic", Iraqi Journal of Civil Engineering. Vol.(12), Issue(1), 2018, pp:45-56.
39. Sheelan Hama, Abdulkader Ismail Al-Hadithi, Mohammed Tarrad N. Al-Dulaim: "BENEFICIAL ROLE OF GLASS WASTES IN CONCRETE – A REVIEW". Journal of Engineering and Sustainable Development. Vol.(22), Issue(2)-(Part-5),March 2018.
40. Mustafa Ahmed Abbas, Abdulkader Ismail Al-Hadithi, "The Effects of adding Waste Plastic Fibers on The Mechanical Properties and Shear Strength of Reinforced Concrete Beams", Iraqi Journal of Civil Engineering. Vol.(12), Issue(1), 2018, pp:111-124.10.37650/ijce.2018.142480
41. Abdulkader I. Al-Hadithi, Mahmood Fawzi Alani,"The importance of adding waste plastics on the properties of high performance concrete", Proceedings of the Institution of Civil Engineers - Waste and Resource Management, Vol(171), Issue(2), 04/2018; pp:1-65, DOI:10.1680/jwarm.17.00040.
42. Abdulkader Ismail Al-Hadithi, BEVIAN Al-Hadithi, SUAAD NASIR, "The effects of adding waste pet fibers on the some mechanical properties of cement mortar under exposure to elevated temperature", Journal of Engineering and Applied Sciences Vol(13), Issue(11), 06/2018; pp:3985-3996, DOI:10.3923/jeasci.2018.3985.3996.
43. Adil Abed, Abdulkader Al-Hadithi, Ahmed Salih Mohammed, "The effects of adding waste plastic fibers on some properties of roller compacted concrete". The 3rd International Conference on Buildings, Construction and Environmental Engineering, BCEE3-2017, Sharm el-Shiekh, Egypt, October 23-25, 2017; 05/2018, DOI:10.1051/matecconf/201816202008 .
44. Z. Al-Azzawi, Abdulkader Al-Hadithi, A. Anees, "Enhancing mechanical properties of no-fines concrete using waste plastic fibres", Journal of Engineering and Applied Sciences Vol(13), Issue(5), 08/2018; pp: 1210-1218.
45. Aseel Madallah Mohammed1, Ammar Ahmed Hammadi and Dr. Abdulkader Ismail Al-hadithi, "The Possibility of Producing Waste Plastic Reinforced Eco-Friendly Recycled Aggregate Concrete". INTERNATIONAL CONFERENCE ON ENGINEERING, MEDICINE AND APPLIED SCIENCES, (ICEMAS) Turky-Antalia 24-25 sep.-2018. Published in International Journal of Engineering & Technology, 7 (4.37) (2018) 153-156.
46. Abdulkader Ismail Al-Hadithi and Mustafa Ahmed Abbas,  "The Effects of adding Waste Plastic Fibers on the Flexural Toughness of Normal Concrete". Journal of Engineering and Applied Sciences.Vol.(13), Issue(24),2018.
47. Ibrahim Hakeem Alfahdawi, Siti Aminah Osman, Roszilah Hamid, Abdulkader Ismail Al-Hadithi, "MODULUS OF ELASTICITY AND ULTRASONIC PULSE VELOCITY OF CONCRETE CONTAINING POLYETHYLENE TEREPHTHALATE (PET) WASTE HEATED TO HIGH TEMPERATURE". Journal of Engineering Science and Technology 12/2018; 13(11):3577-3592.
48. Abdulkader I. Al-Hadithi, Mahamood Fawzi Al-Ani, "Effects of Adding Waste Plastics on Some Properties of High Performance Concrete", 2018 11th International Conference on Developments in eSystems Engineering (DeSE) ; 09/2018 , DOI:10.1109/DeSE.2018.00055
49. Nebras M. Mhedi, Ameer A. Hilal, Abdulkader Al-Hadithi, "Re-Use of Waste Plastic as Fibers in Production of Modified Foamed Concrete", 2018 11th International Conference on Developments in eSystems Engineering (DeSE); 09/2018, DOI:10.1109/DeSE.2018.00059
50. Mahmoud Khashaa Mohammed Al-Ani, Abdulkader Ismail Al-Hadithi, Marwa H.Mohammed, Production and optimization of eco-efficient self compacting concrete SCC with limestone and PET. Construction and Building Materials 02/2019; 197(2019):734–746., DOI:10.1016/j.conbuildmat.2018.11.189.
51. Abdulkader Ismail Al-Hadithi, Ahmed Tareq Noaman, Waseem Khairi Mosleh, "Mechanical Properties and Impact Behavior of PET fiber reinforced Self-Compacting Concrete (SCC)", Composite Structures 05/2019, DOI:10.1016/j.compstruct.2019.111021
52. Ibrahim H Alfahdawi, S A Osman, R Hamid, A Ismail Al-Hadithi, "Influence of PET wastes on the environment and high strength concrete properties exposed to high temperatures". Construction and Building Materials 07/2019; 2019(225):358–370., DOI:10.1016/j.conbuildmat.2019.07.214
53. Maadh G. Alkubaisi  Abdulkader Ismail Al-Hadithi,  Akram S. Mohmoud, “Flexural behavior of beams reinforced by GFRP bars with CFRP sheets immersed in epoxy as shear”, IRAQI JOURNAL OF CIVIL ENGINEERING (2019) 013–001.
54. Abdulkader Ismail Al-Hadithi and Shahd Yonus Al-Waysi, "The Effects of Adding Polymer and Waste Plastic Fibers on the Flexural Behavior of Reinforced Concrete Beams", AUS Journal, 2019, 26(1).
55. Nebras M. Mhedi, Ameer A. Hilal, Abdulkader Al-Hadithi, "Effect of Adding Waste Plastic Fibers on Properties of Modified Foamed Concrete at Various Densities", AUS Journal, 2019, 26(1).
56. Abdulkader Ismail Al-Hadithi, Mazin B. Abdulrahman and Mohammed Issa Saleh Al-Rawi, "Flexural Behaviour of Reinforced Concrete Beams Containing Waste Plastic Fibers", 4 th International Conference on Buildings, Construction and Environmental Engineering (BCEE4-2019), Istanbul, Turky, 7-10/10/2019. doi:10.1088/1757-899X/737/1/012173
57. Sara Ali Almawla, Mahmoud Khashaa Mohammed and Abdulkader Ismail Al-Hadithi, "Fresh and mechanical properties of self-compacting lightweight concrete containing Ponza aggregates",  12th International Conference on Developments in eSystems Engineering (DeSE 2019),Kazan, Russia,6-10/10/2019. DOI 10.1109/DeSE.2019.00028
58. Ibrahim H Alfahdawi, S A Osman, R Hamid, A Ismail Al-Hadithi, Plastic Waste Contribution in Concrete Strength Improvement At Early and Long Curing Ages, International Journal of Engineering & Technology, 8 (1.2) (2019), pp:78-81.
59. Taghreed Khaleefa Mohammed Ali, Nahla Hilal, Rabar H. Faraj and Abdulkader I. Al?Hadithi, “Properties of eco?friendly pervious concrete containing polystyrene aggregates reinforced with waste PET fibers”, https://doi.org/10.1007/s41062-020-00323-w, Innovative Infrastructure Solutions Journal,(2020) 5:77.
60. Ammar Hamid Medher; Abdulkader Ismail Al-Hadithi and Nahla Hilal, Fresh and hardened properties of lightweight self-compacting concrete incorporating with waste plastic and Expanded Polystyrene Beads. Iraqi Journal of Civil Engineering, 2020, Volume 14, Issue 2, Pages 16-21. doi:10.37650/ijce.2020.172864
61. Aseel Madallah Mohammed, Abdulkader Ismail Al?Hadithi and  Diler Sabah Asaad, Investigating Transport Properties of Low?Binder Ultrahigh?Performance Concretes: Binary and Ternary Blendsof Nanosilica, Microsilica and Cement, Arabian Journal for Science and Engineering Volume 45, pages 8369–8378, (2020).       https://doi.org/10.1007/s13369-020-04737-7 
62. Ammar Hamid Medher; Abdulkader Ismail Al-Hadithi and Nahla Hilal, “The Possibility of Producing Self-Compacting Lightweight Concrete by Using Expanded Polystyrene Beads as Coarse Aggregate”, Arabian Journal for Science and Engineering. Vol. 46, PP:4253–4270, (2021),  https://doi.org/10.1007/s13369-020-04886-9 .
63. Nahla N. Hilal1; Mohammed T. Nawar and Abdulkader I. Al-Hadithi, “Effect of Treated Polyethylene Waste on Some Mechanical Properties of Cement Mortar”, Key Engineering Materials, 2020, Vol. 870, pp: 3-9. https://doi.org/10.4028/www.scientific.net/KEM.870.3
64.  Aseel Madallah Mohammed; Diler Sabah Asaad; Abdulkader Ismail Al?Hadithi, “Experimental and statistical evaluation of rheological properties of self-compacting concrete containing fly ash and ground granulated blast furnace slag”, January 2021, Journal of King Saud University, DOI: 10.1016/j.jksues.2020.12.005
65. Abdulkader Ismail Al-Hadithi, Mustafa Ahmed, "Innovative Technique of Using Carbon Fibre Reinforced Polymer Strips for Shear Reinforcement of Reinforced Concrete Beams with Waste Plastic Fibers. European Journal of Environmental and Civil Engineering 01/2019, DOI:10.1080/19648189.2018.1532820
66. Omar Khalid Ali, Abdulkader I. Al-Hadithi, Ahmed Tareq Noaman,   “Experimental and Numerical Analysis of Flexural Behavior of Layered Polyethylene (PET) Fibers RC Beams”, Iraqi Journal of Civil Engineering.  2021, Volume 15, Issue 1, Pages 28-46.DOI: 10.37650/ijce.2021.172854
67.  Ali H. Allawi; Abdulkader I. AL-Hadithi; Akram S. Mohmoud,“Effects of Waste Plastic PET Fibers on The Fresh and Hardened of Normal Concrete”, Iraqi Journal of Civil Engineering, Volume 15, Issue 1, 2021,Pages 47-58. DOI: 10.37650/ijce.2021.172855
68. Waseem Khairi Mosleh Frhaan; B.H. Abu Bakar; Nahla N. Hilal; Abdulkader Ismail Al-Hadithi, Relation between rheological and mechanical properties on behaviour of self-compacting concrete (SCC) containing recycled plastic fibres: a review, December 2020, European Journal of Environmental and Civil Engineering, DOI: 10.1080/19648189.2020.1868344
69. Waseem Khairi Mosleh Frhaan; B.H. Abu Bakar; Nahla N. Hilal; Abdulkader Ismail Al-Hadithi, “Effect of Silica Fume and Super-Plasticizer on Mechanical Properties of Self-Compacting Concrete: A Review”, Conference: 3rd International Conference on Recent Innovations in Engineering (ICRIE 2020) At: Duhok City, Kurdistan Region, Iraq ,December 2020. IOP Conference Series, Materials Science and Engineering 978, DOI:10.1088/1757-899X/978/1/012052

70. Waseem Khairi Mosleh Frhaan; B.H. Abu Bakar; Nahla N. Hilal; Abdulkader Ismail Al-Hadithi, “CFRP for strengthening and repairing reinforced concrete: a review”, June 2021, Innovative Infrastructure Solutions 6(2):49, DOI:

ervice Activities:

• Assistant head of Civil Engineering Department / College of Engineering. University of Anbar 2000-2001.
• Member of Editorial Board of Iraqi Journal of Civil Engineering since 2001.
• Manger Editor of Iraqi Journal of Civil Engineering 2001-2016.
• Assistant of head of Civil Engineering Department for Scientific affairs- College of Engineering/ University of Anbar. 2002 - 2006. 
• Assistant Lecturer in Civil Engineering Department / University of Anbar– 2001-2004. 
• Lecturer in Civil Engineering Department 2004-2007.
• Head of Dams and Water Resources Engineering Department - College of Engineering / University of Anbar, 13/11/2006-30/6/2011.
• Assistant Professor in Dams and Water Resources Engineering Department - College of Engineering / University of Anbar 2007-2015.
• Head of Scientific Promotions in College of Engineering / University of 2012-2016.
• Full Professor in Dams and Water Resources Engineering Department - College of Engineering / University of Anbar 2015-2020.
• Associate Dean for Scientific Affairs and Postgraduate Studies since December 2015-2017.
• Full Professor in Civil Engineering Department - College of Engineering / University of Anbar since November 2020.
• Head of Scientific Promotions in College of Engineering / University of Anbar 2020-2022.
• Director of (American Concrete Institute - Iraq Chapter) ACI- Iraq Chapter (2021-2022)
• Vice President of (American Concrete Institute - Iraq Chapter) ACI- Iraq Chapter (2022).
• President of (American Concrete Institute - Iraq Chapter) ACI- Iraq Chapter (2023).

ientific Activities:

Reviewer at High-Quality Scientific Journals and International Conferences listed below:

• Construction and Building Materials, (Elsevier)
• ACI Structural Journal (American Concrete Institute)
• ACI Materials Journal (American Concrete Institute)
• Advances in Civil Engineering Materials (ASTM International)
• International Journal of Concrete Structures and Materials, (Elsevier)
• International Journal of Sustainable Built Environment, (Elsevier)
• Cleaner Engineering and Technology, (Elsevier)
• Cleaner Waste Systems, (Elsevier)
• Structures, (Elsevier)
• Composites and Advanced Materials, (Sage Publishing)
• Case Studies in Construction Materials, (Elsevier)
• Innovative Infrastructure Solutions, (Springer Nature)
• Structural Concrete, (Wiley) International Journal of Concrete Structures and Materials, (Springer Nature)
• International Conference on Computing, Communications, and Information Technology
• Indian Journal of Engineering and Materials Sciences
• Al-TAQNI Journal
•  Iraqi Journal of Civil Engineering/ College of Engineering-University of Anbar.
• ANBAR Journal for Engineering Sciences/ College of Engineering-University of Anbar.
• Tikrit Journal for Engineering Sciences/ College of Engineering-University of Tikrit.
• Journal of Engineering and Development/ College of Engineering-University of Mustansirya.
• Journal of Engineering and Technology/ University of Technology, Baghdad, Iraq.
• Journal of Engineering Science and Technology/ School of Engineering, Taylor's University, Malysia.
• Australian Journal of Structural Engineering, Australia.
• Reviewer for many engineering and scientific conferences inside and outside Iraq.

Membership of journal editorial boards:

• Iraqi Journal of Desert Studies/ Desert Studies Center-University of Anbar (2015-2016).
• Manger Editor of Iraqi Journal of Civil Engineering (2001-2016).
• Editor in Chief of Iraqi Journal of Civil Engineering (2017-2021).
• Member of Editorial Board of Iraqi Journal of Civil Engineering since 2021.
• Member of Editorial Board of JOURNAL OF ENGINEERING AND SUSTAINABLE DEVELOPMENT(2023).
• Member of Editorial Board of Engineering and Technology Journal (2023).
• Member of Advisory Board of Journal of Civil Engineering Science and Technology (JCEST), (eISSN 2462-1382). Department of Civil Engineering, Faculty of Engineering (UNIMAS) UNIVERSITI MALASYA SAWRAK (2016-2022).

Membership of Conferences Scientific Committee:

• Member of the Scientific Committee of ICEMAS Scientific Committee – ISNRA Conference (2018), Antalya, Turkey.
• Member of the Scientific Committee of 1st Scientific Conference of College of Engineering – University of Anbar, Ramadi, Iraq (2011).
• Member of the Scientific Committee of the 2nd International Conference for Engineering Sciences and Information Technology (ESIT 2022).
• Member of the Scientific Committee of 3rd Annual International Conference on Information and Sciences (AICIS’23), December 22-23, 2023, Fallujah, Iraq.

Patents and Innovation

• Patent Number: 3669, Patent Title: "Improving Some Mechanical Properties of Concrete by Adding the Chips Resulting from Cutting the Plastic Beverage Bottles", Patent Date: 25/9/2013 International Patent Classification: E04C1/04
• Patent Number: 5259, Patent Title: “Improving Shear Strength of Reinforced Concrete Beams by Adding Waste Plastic Fibers and Replacing the Steel Stirrups by CFRP Strips". Patent Date: 26/2/2018, International Patent Classification: E04C3/02
• Patent Number: 6537, Patent Title: “Enhancement of Mechanical Properties of Modified Foamed Concrete by adding Waste Plastic Fibers". Patent Date: 28/1/2021, International Patent Classification: C04B18/22.
• Patent Number: 7154, Patent Title: “Characteristics of Self-compacting Concrete Containing Nanocellulose Prepared From Papers Wastes ". Patent Date: 1/3/2022,International Patent Classification: C04B2B/04

Non-Academic Experience:

• Engineer in Iraqi Military Works Directorate / Ramadi Branch, 1993 –1994.
• Engineer in the Plant of Clinical Bottle / Ramadi/ 1994-1995.
• Structural Engineer – Umour al Mukhtar Engineering Consultant Bureau / Derna-Libya / 1995.
• Lecturer in Umar AL Mukhatar Institute / Derna – Libya / 1995
• Consultant Engineer / Laboratories Director – Engineering Consultant Bureau / College of Engineering, University of Anbar/2004-2011.
• External Lecturer in Civil Engineering Department Labs– College of Engineering, University of Anbar/1996-1997-1998-2000.

2. Certifications or Professional Registrations:

• Participating in the 1st Iraqi Conference of Civil Engineering .20-22/2/2001, Al-Anbar, Iraq.
• Participating in the 6th International Conference of Concrete Technology in Development Countries, Amman-Jordan-21-24/10/2002.
• Participating in The First International Engineering Sciences Conference of Aleppo University (IESC"2008). 2-4/11/2008, Aleppo, Syria.
• Participating in First Scientific Conference of College of Engineering, Babylon University -  17-18 MAY 2009, Babylon, Iraq.
• Participating in Second Annual Scientific Conference of College of Engineering, Babylon University,  24-25, February 2010, Babylon, Iraq.
• Participating in the First International Conference on Engineering Sciences, Anbar, 2011.
• Participating in The 5th Jordanian International Civil Engineering Conference /(JICEC’5), Amman-Jordan, 17-19 January, 2012.
• Participating in International Conference on Green Technology & Ecosystems for Global Sustainable Development 2012 (ICGTEC2012), which held on 28th - 30th MAY 2012; UNIVERSITY OF TUZLA, BOSNIA AND ERZEGOVINA.
• Participating in 11th International Conference on Concrete Engineering and Technology 2012 which held on 12 - 14 June 2012 at Kuala Lumpur.
• Participating in Second Scientific Conference for Pure Sciences, University of ANBAR, which held on 20th-22th Nov. 2012.
• Participating in The International Conference to Achieve Sustainable Development in Iraq, University of Baghdad - Baghdad, IRAQ; 8-9/05/2013.
• Participating in the International Conference on nano science, Engineering and Management (BOND21) which was, 19-21 Aug. 2013, Bayview Beach Resort, Batu Ferringhi Beach, Penang, Malaysia.
• Participating in Scientific and Engineering Challenges of the Construction and Technological Recycling of Industrial Wastes. Belgorod State Technological University, Shukov, Belgorod, Russia. March, 2014.
• Participating in The 10th Asia Pacific Conference on Sustainable Energy & Environmental Technologies (APCSEET 2015), University of Seoul, Korea.; 07/2015.
• Participating in 1st International Conference on Engineering and Innovative Technology, Salahaddin University-Erbil , Iraq, 2016.
• Participating in The 3rd International Conference on Buildings, Construction and Environmental Engineering, BCEE3-2017, Sharm el-Shiekh, Egypt, October 23-25, 2017.
• Participating in INTERNATIONAL CONFERENCE ON ENGINEERING, MEDICINE AND APPLIED SCIENCES, (ICEMAS) Turky-Antalia, 24-25 sep.-2018.
• Participating in the 2018 11th International Conference on Developments in eSystems Engineering (DeSE).
• Participating in 4 th International Conference on Buildings, Construction and Environmental Engineering (BCEE4-2019), Istanbul, Turky, 7-10/10/2019.
• Participating in the 12th International Conference on Developments in eSystems Engineering (DeSE 2019),Kazan, Russia,6-10/10/2019.
• Participating in the 3rd International Conference on Recent Innovations in Engineering (ICRIE 2020), Duhok City, Kurdistan Region, Iraq ,December 2020.
• Participating in the 8th International Engineering Conference Erbil, Kurdistan Region-Iraq on February 23-24, 2022.

3. Current Membership in Professional Organizations:

• Consultant engineer in the civil engineering department- Iraqi Engineers Union.
• Member of the Iraqi Teachers Union.
• Member of Association of University Lecturers in Iraq.
• Member in Federation of Arab Engineers.
• Member of Iraqi Forum of Inventors.
• Director of (American Concrete Institute - Iraq Chapter) ACI- Iraq Chapter (2021-2023).
• Vice President of (American Concrete Institute - Iraq Chapter) ACI- Iraq Chapter (2022-2023).
• President of (American Concrete Institute - Iraq Chapter) ACI- Iraq Chapter (2023).

4. Honors and Awards:

• President’s Award for the first professor in the scientific discipline at the University of Anbar for the year, Jan. 2021.
• College of Engineering Dean’s Award for the first professor at College of Engineering- University of Anbar, Nov. 2021.
• NISA Award for Outstanding Iraqi Research - 2019 Award Winners/ Best paper in Engineering and Technology, Feb. 2020.
• Award: Golden Medal from International Conference of Egypt Cooperation of Egyptian Inventors Syndicate "Egypt Invents 2017", Mar 2017.
• Award: Silver Medal Certificate from 9th International Invention Fair in Middle East (IIFME) in Class D of Inventions-KUWAIT SCIENCE CLUB- KUWAIT, Jan 2017.
• Award: Medal for scientific excellence/ University of Anbar, Nov 2016.
• Award: Creativity and Innovation Award in the Field of Engineering (1st Winner) - Republic of Iraq/ Ministry of Higher Education and Scientific Research, May 2014.
• (8) Acknowledgments from Iraqi Minster of Higher Education and Scientific Research
• (30)Acknowledgments from President of University of Anbar.
• (95) Acknowledgments from dean of college of engineering, university of Anbar.