Publication

1- Abdulkader Ismail Al-Hadithi, Ibrahim A.S.Al-Jumaily and Bayan S.Al-Nu'man,“Mechanical Properties of No-Fines Polymer Concrete”. 1st Iraqi Conference of Civil Engineering .20-22/2/2001,Al-Anbar,Iraq.Published in the Iraqi Journal for Civil Engineering, special issue 2, September 2001.

2- Abdulkader Ismail Al-Hadithi, Ibrahim A.S.Al-Jumaily and Bayan S.Al-Nu'man, “Some Properties of No-Fines Polymer Concrete” . 6th International Conference of Concrete Technology in Development Countries, Amman-Jordan-21-24/10/2002.

3- Abdulkader Ismail Al-Hadithi, Bayan S. Al-Nu'man and Ayad A.Sleby, “Sawdust Concrete and Its Mechanical Properties”. Iraqi Journal of Civil Engineering, 5th issue, March 2004, pp:27-45.

4-Al-Hadithi, Abdulkader Ismail , “Influence of Increasing Water:Cement Ratio on Concrete Containing Low Content of Polymer”. Iraqi Journal  of Civil Engineering, 6th issue, June 2005, pp:25-36.

5- Abdulkader Ismail Al-Hadithi, Khalid Battal Najim and Tariq A. Thaker, "Beahaviour of No-Fines Reinforced Polymer-Modified Concrete Beams".  Iraqi Journal of Civil Engineering, 8th issue, June 2007, pp:1-15.

6- Abdulkader Ismail Al-Hadithi, Bayan S. Al-Nu'man,“Some Properties of  No-Fines Polymer Concrete Hollow Blocks” . Journal of Engineering and Development, Vol.(11), No (3), December 2007. pp(1-13).

7- Khalid R. Mahmood Al-Janabi and Abdulkader I. Abdulwahab Al-Hadithi,"Modeling of Polymer Modified Concrete Strength with Artificial Neural Networks".  Iraqi Journal of Civil Engineering, 10th issue, March 2008, pp: 47-68.

8- Abdulkader Ismail Al-Hadithi and Bayan S. Al-Nu'man,"Behaviour of Polymer Modified Concrete Slabs under Impact".Iraqi Journal of Civil Engineering, 11th issue, June 2008.pp:1-24.

9- Abdulkader Ismail Al-Hadithi, Bayan S. Al-Nu'man, ,“Flexural Behaviour of Polymer Modified Reinforced Concrete Beams". Journal of Engineering and Development, Vol 13, No1, March(2009). pp(89-109).

10- Al-Hadithi, Abdulkader Ismail, “Some Properties of Concrete Using Waste Plastic Fiber with a Very Small Percentages”.The First International Engineering Sciences Conference of Aleppo University (IESC"2008). 2-4/11/2008,Aleppo,Syria.

11- Abdulkader Ismail Al-Hadithi and Sheelan M. Hama Al - Barazanji , “Some Mechanical Properties of Polymer Modified Concrete Reinforced with a Waste Plastic Fiber”.First Scientific Conference of College of Engineering ,Babylon University -  17-18 MAY 2009, Babylon, Iraq. Published in the Iraqi Journal of Mechanical And Materials Engineering, Special Issue for the Paper Presented at the 1st Annual Scientific Conference of the College of Engineering 17-18 May 2009, Part (D).pp:635-646.

12- Abdulkader Ismail Al-Hadithi and, Ghassan S. Jameel Al-Kubaysi, "Mechanical  Properties of Fiber Concrete Containing Acrylic Polymer".Second Annual Scientific Conference of College of Engineering ,Babylon University  24-25 February 2010, Babylon, Iraq.Published in the Iraqi Journal of Mechanical And Material Engineering, Special Issue for the Paper Presented in 2nd  Annual Scientific Conference of the College of Engineering 24-25 March 2010, Part (D).pp(46-61).

13- Abdulkader Ismail Al-Hadithi and, Ahmed Tareq Al-Ejbari, "Study Some Properties of Concrete Containing Styrobore", Second Annual Scientific Conference of College of Engineering ,Babylon University  24-25 February 2010, Babylon, Iraq. Published in the Iraqi Journal of Mechanical And Material Engineering, Special Issue for the Paper Presented in 2nd  Annual Scientific Conference of the College of Engineering 24-25 March 2010, Part (E).pp(61-68).

14-Abdulkader Ismail Al-Hadithi ; Ahmed Tareq Al-Ejbari and Ghassan S.Jamil, “Behaviour of Waste Fiber Concrete Slabs Under Low Velocity Impact”. Published in Iraqi Journal of Civil Engineering. Volume (9), Issue No.(1), 2013 ,pp:135-148.

15- Abdulkader Ismail Al-Hadithi, Ahmed Tariq Al-Ejbary, Mahmmod K. Al-Ani, "Study Some Properties of Concrete Containing Industrial Styrobore and Modified by Polymer",Accepted in the First Scientific Conference of College of Engineering, University of Anbar  November- 2011, Ramadi , Al-Anbar, Iraq.

16- Abdulkader Ismail Al-Hadithi, Ameer Abdulrahman Al- Dulaimy and Ahmed Tareq Al-Ejbari, "Behaviour of Reinforced Polymer Modified High Strength Concrete Slabs under Low Velocity Impact",First Scientific Conference of College of Engineering , University of Anbar  November- 2011, Ramadi ,Al-Anbar, Iraq.Published in ANBAR Journal for Engineering Sciences, Volume (5), Special Issue No. (2), 2012. pp:171-189.

17- Abdulkader Ismail Al-Hadithi and Bayan S. Al-Nu'man, "Improving the Mechanical Properties and Resistance to High Temperature of Concrete by Adding Styrene Butadiene Rubber (SBR) Polymer".The 5th Jordanian International Civil Engineering Conference /(JICEC’5),Amman-Jordan , 17-19 January, 2012.

18- Abdulkader Ismail Al-Hadithi, Khalil I. Aziz and Mohammed Tarrad N. Al-Dulaim. “Some Mechanical Properties of Ferro-Cement Slabs Modified by Polymer”. International Conference on Green Technology & Ecosystems for Global Sustainable Development 2012 (ICGTEC2012), which held on 28th - 30th MAY 2012 ; UNIVERSITY OF TUZLA, BOSNIA AND ERZEGOVINA.

19- Abdulkader Ismail Al-Hadithi and Ghassan S. Jameel Al-Kubaysi.  “The Effects of Adding Acrylic Polymer on Some Mechanical Properties and the Resistance to Elevated Temperatures of Fiber Reinforced Concrete”. 11th International Conference on Concrete  Engineering and Technology 2012 which held on 12 - 14 June 2012 at Kuala Lumpur.

20- Abdulkader Ismail Al-Hadithi, Dr.Ayad Abdul-Razzaq Mutar, BASHAR ABDULAZEEZ MAHMOOD, “Using of Poly Styrene Wastes in Concrete”, Published in the Proceeding of Second Scientific Conference for Pure Science , University of ANBAR, which held on 20th-22th Nov. 2012.

21- Abdulkader Ismail Al-Hadithi, Ibrahem Ahmed S. Al-Jumaily and Noor Salah Najim Al-Samarài:, “Mechanical Properties of Carbon Fiber Lightweight Aggregate Concrete Containing Acrylic Polymer” , ANBAR Journal for Engineering Sciences, Volume (6), No. (3), 2013. pp:358-373.

 22- Abdulkader Ismail Al-Hadithi. , “Improving Impact and Mechanical Properties of Gap-Graded Concrete by Adding Waste Plastic Fibers” . Published in the International Journal of Civil Engineering and Technology (IJCIET). Volume 4, Issue 2, March - April (2013), pp. 118-131.

23- Abdulkader Ismail Al-Hadithi, Aseel M. Mohammed, Saif S. Mansour:,” The Possibility of Using Residues of Drink Bottles Making from Aluminum Composites as Aluminum Fibers to Produce Fiber Reinforced Concrete”. The International Conference to Achieve Sustainable Development in Iraq, University of Baghdad - Baghdad, IRAQ; 8-9/05/2013. Published in the of Association of Arab Univercities, Journal of Engineering Sciences , Special Issue 2013,pp:134-144.

24- Abdulkader Ismail Al-Hadithi, Khalil Ibrahim Aziz, Mohammed Tarrad Nawar Al-Dulaim. “BEHAVIOR OF FERRO-CEMENT SLABS MODIFID BY POLYMER UNDER LOW VELOCITY IMPACT”. Published in the International Conference on nano science, Engineering and Management (BOND21) which was held in 19-21 Aug. 2013 at Bayview Beach Resort, Batu Ferringhi Beach, Penang, Malaysia. Published in Advanced Materials Research Vol. 925 (2014) pp 3-7 © (2014) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/ AMR.925.3

25- Abdulkader Ismail Al-Hadithi, Valery S. Lesouik, Ahmed Anis Al-Ani,”The Effects of adding Carbon Fibers to the Concrete using Iraqi Raw Materials” ."?????????? ? ?????????? ???????? ?? ???????? ???????? ?????????? ????". Published in Scientific and Engineering Challenges of the Construction and Technological Recycling of Industrial Wastes . Belgorod State Technological University, Shukov, Belgorod , Russia. March, 2014.

26- Abdulkader Ismail Al-Hadithi, Ameer Abdulrahman Al-Dulaimy, Saeed Khalaf Rejib, ” Stress-strain relationship for steel-fiber reinforced polymer modified concrete under compression. Published in Iraqi Journal of Civil Engineering. Vol.(10), Issue(1), 2016, pp:19-30.

27- Abdulkader Ismail Al-Hadithi, Adil N. Abed and Eng. ahmed Salie Mohammed, “The Effect of  Adding Waste Plastic Fibers on Engineering Properties of Roller Compacted Concrete”. Published in Iraqi Journal of Civil Engineering. Vol.(10), Issue(1), 2014, pp:31-39.

28- Abdulkader Ismail Al-Hadithi, Khalil Ibrahim Aziz and Mohammed Tarrad Nawar Al-Dulaimi “ Behaviour of Ferrocement Slabs Containing SBR Under Impact Loads. International Journal of Sustainable and Green Energy,2015; 4(3-1): 34-50,Published online January 13, 2015.

29- Abdulkader Ismail Al-Hadithi and  Zayd Abdul-Jabbar Al-Obaidi,” BEHAVIOR OF FERROCEMENT SLABS CONTAINING WASTE PLASTIC FIBERS UNDER IMPACT LOADINGS’. Ciência e Técnica Vitivinícola Journal, 05/2015; 30(5):205-219.

30- Abdulkader Ismail Al-Hadithi,” THE EFFECTS OF ADDING WASTE PLASTIC FIBERS ON SOME MECHANICAL PROPERTIES OF GAP-GRADED CONCRETE CURING BY DRAINAGE WATER AND SEWAGE WATER”. The 10th Asia Pacific Conference on Sustainable Energy & Environmental Technologies (APCSEET 2015), University of Seoul, Korea.; 07/2015.

31- Abdulkader Ismail Al-Hadithi, Akram S. Mahmood, and Yasmin Abdul-Hameed, ”Experimental and Numerical Investigation on Shear Transfer of Concrete Specimens Strengthened with CFRP Sheets under Tensile Forces”, Al-Nahrain University- College of Engineering Journal;07/2015.

32- Abdulkader Ismail Al-Hadithi, Mahmood Fawzi Alani , “Mechanical Properties of High Performance Concrete Containing Waste Plastic as Aggregate”, Journal of Engineering, University of Baghdad, College of Engineering, Issue (8), Vol. (21), August 2015, pp:100-115.

33- Abdulkader Ismail Al-Hadithi and  Eng. Zayd Abdul-Jabbar Al-Obaidi, "The Possibility of Enhancing Some Mechanical Properties of Ferro-Cement Mortar by Waste Plastic Fibers". 1st International Conference on Engineering and Innovative Technology. Published in ZANCO Journal of Pure and Applied Sciences (The official scientific journal of Salahaddin University-Erbil ZJPAS), (2016) 28 (2); pp:470-476.

34-Abdulkader Ismail Al-Hadithi and Nahla Naji Hilal, ”The Possibility of Enhancing Some Properties of Self-Compacting Concrete by Adding Waste Plastic Fibers”, Journal of Building Engineering, Vol.(8), December 2016, pp:20-28.

35- Ibrahim H Alfahdawi, S A Osman, R Hamid and Abdulkader Ismail Al-hadithi, ”Utilizing waste plastic polypropylene and polyethylene terephthalate as alternative aggregates to produce lightweight concrete: A review”,Journal of Engineering Science and Technology, Vol. 11(8) August 2016.

36- Abdulkader Ismail Al-Hadithi, Waseem Khairi Mosleh Frhaan, " The Effects of Adding Waste Plastic Fibers (WPFs) on Some Properties of Self Compacting Concrete using Iraqi local Materials". Published in Iraqi Journal of Civil Engineering. Vol.(11), Issue(1), 2017, pp:1-20.

37- Abdulkader Ismail Al-Hadithi, Shahad Younus Thabet Al-Waysi, "Mechanical Properties and Flexural Behavior of reinforced Polymer Modified Concrete beams enhanced by Waste Plastic Fibers (WPF)". Published in Iraqi Journal of Civil Engineering. Vol.(11), Issue(2), 2017, pp:16-32.

38-Shamil K. Ahmed, Abdulkader Ismail Al-Hadithi, Saad J. Mohammed, " Producing of eco-friendly lightweight concrete using waste polystyrene particles as aggregates with adding waste plastic", Published in Iraqi Journal of Civil Engineering. Vol.(12), Issue(1), 2018, pp:45-56.

39- Sheelan Hama, Abdulkader Ismail Al-Hadithi, Mohammed Tarrad N. Al-Dulaim: "BENEFICIAL ROLE OF GLASS WASTES IN CONCRETE – A REVIEW".Published in Journal of Engineering and Sustainable Development. Vol.(22), Issue(2)-(Part-5),March 2018.

40- Mustafa Ahmed Abbas, Abdulkader Ismail Al-Hadithi, "The Effects of adding Waste Plastic Fibers on The Mechanical Properties and Shear Strength of Reinforced Concrete Beams", Published in Iraqi Journal of Civil Engineering. Vol.(12), Issue(1), 2018, pp:111-124.

41- Abdulkader I. Al-Hadithi, Mahmood Fawzi Alani,"The importance of adding waste plastics on the properties of high performance concrete", Published in Proceedings of the Institution of Civil Engineers - Waste and Resource Management, Vol(171), Issue(2), 04/2018; pp:1-65, DOI:10.1680/jwarm.17.00040.

42-Abdulkader Ismail Al-Hadithi, BEVIAN Al-Hadithi, SUAAD NASIR, "The effects of adding waste pet fibers on the some mechanical properties of cement mortar under exposure to elevated temperature", Published in Journal of Engineering and Applied Sciences Vol(13), Issue(11), 06/2018; pp:3985-3996, DOI:10.3923/jeasci.2018.3985.3996.

43- Adil Abed, Abdulkader Al-Hadithi, Ahmed Salih Mohammed, "The effects of adding waste plastic fibers on some properties of roller compacted concrete". The 3rd International Conference on Buildings, Construction and Environmental Engineering, BCEE3-2017, Sharm el-Shiekh, Egypt, October 23-25, 2017; 05/2018, DOI:10.1051/matecconf/201816202008 .

44- Z. Al-Azzawi, Abdulkader Al-Hadithi, A. Anees, "Enhancing mechanical properties of no-fines concrete using waste plastic fibres", Published in Journal of Engineering and Applied Sciences Vol(13), Issue(5), 08/2018; pp: 1210-1218.

45- Aseel Madallah Mohammed1, Ammar Ahmed Hammadi and Dr. Abdulkader Ismail Al-hadithi, "The Possibility of Producing Waste Plastic Reinforced Eco-Friendly Recycled Aggregate Concrete". INTERNATIONAL CONFERENCE ON ENGINEERING, MEDICINE AND APPLIED SCIENCES, (ICEMAS) Turky-Antalia 24-25 sep.-2018. Published in International Journal of Engineering & Technology, 7 (4.37) (2018) 153-156.

46- Abdulkader Ismail Al-Hadithi and Mustafa Ahmed Abbas,  "The Effects of adding Waste Plastic Fibers on the Flexural Toughness of Normal Concrete". Journal of Engineering and Applied Sciences.Vol.(13), Issue(24),2018

47- Ibrahim Hakeem Alfahdawi, Siti Aminah Osman, Roszilah Hamid, Abdulkader Ismail Al-Hadithi, "MODULUS OF ELASTICITY AND ULTRASONIC PULSE VELOCITY OF CONCRETE CONTAINING POLYETHYLENE TEREPHTHALATE (PET) WASTE HEATED TO HIGH TEMPERATURE". Journal of Engineering Science and Technology 12/2018; 13(11):3577-3592.

48-Abdulkader I. Al-Hadithi, Mahamood Fawzi Al-Ani, "Effects of Adding Waste Plastics on Some Properties of High Performance Concrete", 2018 11th International Conference on Developments in eSystems Engineering (DeSE) ; 09/2018 , DOI:10.1109/DeSE.2018.00055

49-Nebras M. Mhedi, Ameer A. Hilal, Abdulkader Al-Hadithi, "Re-Use of Waste Plastic as Fibers in Production of Modified Foamed Concrete", 2018 11th International Conference on Developments in eSystems Engineering (DeSE); 09/2018, DOI:10.1109/DeSE.2018.00059

50-Mahmoud Khashaa Mohammed Al-Ani, Abdulkader Ismail Al-Hadithi, Marwa H.Mohammed, Production and optimization of eco-efficient self compacting concrete SCC with limestone and PET. Construction and Building Materials 02/2019; 197(2019):734–746., DOI:10.1016/j.conbuildmat.2018.11.189.

51- Abdulkader Ismail Al-Hadithi, Ahmed Tareq Noaman, Waseem Khairi Mosleh, "Mechanical Properties and Impact Behavior of PET fiber reinforced Self-Compacting Concrete (SCC)", Composite Structures 05/2019;, DOI:10.1016/j.compstruct.2019.111021

52-Ibrahim H Alfahdawi, S A Osman, R Hamid, Ismail Al-Hadithi, "Influence of PET wastes on the environment and high strength concrete properties exposed to high temperatures". Construction and Building Materials 07/2019; 2019(225):358–370., DOI:10.1016/j.conbuildmat.2019.07.214

53-Abdulkader Ismail Al-Hadithi and Shahd Yonus Al-Waysi, "The Effects of Adding Polymer and Waste Plastic Fibers on the Flexural Behavior of Reinforced Concrete Beams", AUS Journal, 2019, 26(1).

54- Nebras M. Mhedi, Ameer A. Hilal, Abdulkader Al-Hadithi, "Effect of Adding Waste Plastic Fibers on Properties of Modified Foamed Concrete at Various Densities", AUS Journal, 2019, 26(1).

55- Abdulkader Ismail Al-Hadithi, Mazin B. Abdulrahman and Mohammed Issa Saleh Al-Rawi, "Flexural Behaviour of Reinforced Concrete Beams Containing Waste Plastic Fibers", 4 th International Conference on Buildings, Construction and Environmental Engineering (BCEE4-2019), Istanbul, Turky, 7-10/10/2019.

56- Sara Ali Almawla, Mahmoud Khashaa Mohammed and Abdulkader Ismail Al-Hadithi, "Fresh and mechanical properties of self-compacting lightweight concrete containing Ponza aggregates",  12th International Conference on Developments in eSystems Engineering (DeSE 2019),Kazan, Russia,6-10/10/2019.

57- Taghreed Khaleefa Mohammed Ali, Nahla Hilal, Rabar H. Faraj and Abdulkader I. Al?Hadithi, “Properties of eco?friendly pervious concrete containing polystyrene aggregates reinforced with waste PET fibers”, https://doi.org/10.1007/s41062-020-00323-w, Innovative Infrastructure Solutions Journal,(2020) 5:77.

58- Aseel Madallah Mohammed, Abdulkader Ismail Al?Hadithi and  Diler Sabah Asaad, “Investigating Transport Properties of Low?Binder Ultrahigh?Performance Concretes: Binary and Ternary Blendsof Nanosilica, Microsilica and Cement”, https://doi.org/10.1007/s13369-020-04737-7, Arabian Journal for Science and Engineering.

59- Ammar Hamid Medher; Abdulkader Ismail Al-Hadithi and Nahla Hilal, “The Possibility of Producing Self-Compacting Lightweight Concrete by Using Expanded Polystyrene Beads as Coarse Aggregate”, https://doi.org/10.1007/s13369-020-04886-9 , Arabian Journal for Science and Engineering.

60-   Nahla N. Hilal1; Mohammed T. Nawar and Abdulkader I. Al-Hadithi, “Effect of Treated Polyethylene Waste on Some Mechanical Properties of Cement Mortar”, Key Engineering Materials, 2020, Vol. 870, pp: 3-9. https://doi.org/10.4028/www.scientific.net/KEM.870.3

61-  Aseel Madallah Mohammed; Diler Sabah Asaad; Abdulkader Ismail Al?Hadithi, “Experimental and statistical evaluation of rheological properties of self-compacting concrete containing fly ash and ground granulated blast furnace slag”, January 2021, Journal of King Saud University, DOI: 10.1016/j.jksues.2020.12.005

62- Abdulkader Ismail Al-Hadithi, Mustafa Ahmed, "Innovative Technique of Using Carbon Fibre Reinforced Polymer Strips for Shear Reinforcement of Reinforced Concrete Beams with Waste Plastic Fibers. European Journal of Environmental and Civil Engineering 01/2019, DOI:10.1080/19648189.2018.1532820

63- Omar Khalid Ali, Abdulkader I. Al-Hadithi, Ahmed Tareq Noaman,   “Experimental and Numerical Analysis of Flexural Behavior of Layered Polyethylene (PET) Fibers RC Beams”, Published in Iraqi Journal of Civil Engineering.  2021, Volume 15, Issue 1, Pages 28-46

64- Ali H. Allawi; Abdulkader I. AL-Hadithi; Akram S. Mohmoud, “Effects of Waste Plastic PET Fibers on The Fresh and Hardened of Normal Concrete”, Iraqi Journal of Civil Engineering, 2021, Volume 15, Issue 1, Pages 47-58

65 - Waseem Khairi Mosleh Frhaan; B.H. Abu Bakar; Nahla N. Hilal; Abdulkader Ismail Al-Hadithi, Relation between rheological and mechanical properties on behaviour of self-compacting concrete (SCC) containing recycled plastic fibres: a review, December 2020, European Journal of Environmental and Civil Engineering, DOI: 10.1080/19648189.2020.1868344

66-  Waseem Khairi Mosleh Frhaan; B.H. Abu Bakar; Nahla N. Hilal; Abdulkader Ismail Al-Hadithi, “Effect of Silica Fume and Super-Plasticizer on Mechanical Properties of Self-Compacting Concrete: A Review”, Conference: 3rd International Conference on Recent Innovations in Engineering (ICRIE 2020) At: Duhok City, Kurdistan Region, Iraq ,December 2020. IOP Conference Series, Materials Science and Engineering 978, DOI:10.1088/1757-899X/978/1/012052

67- Waseem Khairi Mosleh Frhaan; B.H. Abu Bakar; Nahla N. Hilal; Abdulkader Ismail Al-Hadithi, “CFRP for strengthening and repairing reinforced concrete: a review”, June 2021, Innovative Infrastructure Solutions 6(2):49, DOI:10.1007/s41062-020-00417-5

68-   Ghassan Subhi Jameel, Ahmed Tareq Noaman , Bevian Ismail Al-Hadithi, Abdulkader Ismail Al-Hadithi, “Effect of Polymer SBR on Strength Reduction in Concrete Immersed in Drainage and Ground Water”, Anbar Journal Of Engineering Science, Vol(9),  2021.

Lectures

No.	Subjects	Lectures	Stage	File	Video
1	Reinforced Concrete Design	Flexural Analysis of beam by working stress method	Fourth
2	Reinforced Concrete Design	One Way Slab	Fourth
3	Reinforced Concrete Design	Stress – Strain Diagram for Steel	Fourth
4	Reinforced Concrete Design	Introduction + References	Fourth
5	Reinforced Concrete Design	Shear Requirements	Fourth
6	Reinforced Concrete Design	T. Beam Design	Fourth
7	Reinforced Concrete Design	Singly R.C. Beam	Fourth
8	Reinforced Concrete Design	Concrete Tanks	Fourth
9	Reinforced Concrete Design	Design Circular Concrete Tanks	Fourth
10	Reinforced Concrete Design	Design of Rectangular concrete Tank	Fourth

Other

Education  

 Thesis

Abdulkader Ismail Al-Hadithi: Flexural, Impact and Thermal Properties of Polymer Modified Concrete. 03/2005, Degree: PhD, Supervisor: Prof. Dr. Bayan Salim Al-Nu’man

Abdulkader Ismail Al-Hadithi: No-Fines Polymer Concrete Mechanical Properties and Behaviour. 09/2000, Degree: M.Sc., Supervisor: Assist. Prof. Dr.Ibrahim Ahmed S. Al-Jumaily and Assist. Prof. Dr. Bayan Salim Al-Nu’man

Honors and Awards:

Patents and Innovation

• Patent Number: 3669

Patent Title: "Improving Some Mechanical Properties of Concrete by Adding the Chips Resulting from Cutting the Plastic Beverage Bottles"

Patent Date: 25/9/2013

International Patent Classification: E04C1/04

• Patent Number: 5259

Patent Title: “Improving Shear Strength of Reinforced Concrete Beams by Adding Waste Plastic Fibers and Replacing the Steel Stirrups by CFRP Strips".

Patent Date: 26/2/2018

International Patent Classification: E04C3/02

• Patent Number: 6537

Patent Title: “Enhancement of Mechanical Properties of Modified Foamed Concrete by adding Waste Plastic Fibers".

Patent Date: 28/1/2021

International Patent Classification: C04B18/22

Training:

• Information Training on Accreditation Services for The University of Anbar, Russ College of Engineering & Technology, OHIO University, OHIO- ATHENS, United State of America . 2011.
• 4-Week Academic Developing Training Program, 7th Nov-2nd Dec /2012 Liverpool John Moores University, Liverpool, United Kingdom.
• Ten Day Course (50 hours) in General English & Academic Skills, 7/11/2012-18/11/2012,   Liverpool School  of English, Liverpool, United Kingdom.
• One Month Iraq Professors Advanced Study Program, 16th Nov- 21st Dec/2012  , Southwest Jiaotong University, Chengdu - Sichuan Province, P. R. China.
• Personal Strategic Planning, 25th -28th  May-2016, Baghdad, Iraq.
• The Austrian Education System & New Technology in Education, 14th-15th August-2018, Die BILDUNGSMANAGER KG in Vienna, Vienna, Austria.

 Administration and Professional Experience:

a . Engineer in Iraqi Military Works Directorate / Ramadi Branch , 1993 –1994.

b. Engineer in the Plant of Clinical Bottle / Ramadi/ 1994-1995.

c. Structural Engineer – Umour al Mukhtar Engineering Consultant Bureau / Derna-Libya / 1995.

d . Lecturer in Umar AL Mukhatar Insitiute / Derna – Libya / 1995

e .Consultant Engineer / Laboratories Director – Engineering Consultant Bureau / College of Engineering, University of Anbar/2004-2011.

f . External Lecturar in Civil Engineering Department Labs– College of Engineering, University of Anbar/1996-1997-1998-2000.

 Academic Experience :

1. Assistant head of Civil Engineering Department / College of Engineering. University of Anbar 2000-2001 .
2. Manger Editor of Iraqi  Journal of Civil Engineering  2001-2016.
3. Assistant of head of Civil Engineering Department for Scientific affairs- College of Engineering / University of Anbar. 2002 - 2006.  
4. Assistant Lecturer in Civil Engineering Department / University of Anbar– 2001-2004.  
5. Lecturer in Civil Engineering Department 2004-2007.
6. Head of Dams and Water Resources Engineering Department - College of Engineering / University of Anbar, 13/11/2006-30/6/2011.
7. Assistant Professor in Dams and Water Resources Engineering Department - College of Engineering / University of Anbar since 2007-2015.
8. Head of Scientific Promotions in College of Engineering / University of since 2012.
1. Full Professor in Dams and Water Resources Engineering Department - College of Engineering / University of Anbar since 2015.
10.  Associate Dean for Scientific Affairs and Postgraduate Studies since December 2015.
11. Member of Editorial Board of Iraqi  Journal of Civil Engineering  Scince-2016. Member of Editorial Board of Iraqi Journal of Desert Studies/ Desert Studies Center-University of Anbar Scince-2015.Editor in Chief of Iraqi Journal of Civil Engineering since 2017.
50. Member of Editorial Advisory Board of Journal of Civil Engineering, Science and Technology.

-Unions:

• Consultant engineer in the civil engineering department- Iraqi Engineers Union.
• Member of the Iraqi Teachers Union.
• Member of Association of University Lecturers in Iraq.
• Member in Federation of Arab Engineers.
• Member of Iraqi Forum of Inventors.
• Director of (American Concrete Institute - Iraq Chapter) ACI- Iraq Chapter (2021-2023).
•  
• Vice President of ACI- IRAQ chapter - Term 2021-2022.