البحوث العلمية

A. K. Mashan, W. M. Abed, M. A. Ahmed, “Numerical Investigation of Hydraulic-Thermal Performance for a Double-Pipe Heat Exchanger Equipped

Ebtihal A. Mukhlif, Waleed M. Abed, "Influences of submerged V-broken rib geometry on the hydrothermal performance of vortex and engulfment flow regimes within a T-channel", International Communications in Heat and Mass Transfer, vol. 159, Issue 1, 2024.(Link)

A. Al-Damook, Abed, W. M., "Numerical optimum investigation of hydrothermal characteristics over a porous bank of flat tubes heat exchanger", International Communications in Heat and Mass Transfer, vol. 154, Issue 1, 2024.(Link)

Abed, W. M., A. Al-Damook, "Optimal characteristics of natural convection in a square porous-nanofluid-filled enclosure containing three tubes", Numerical Heat Transfer, Part A: Applications, vol. 85, Issue 1, 2024.(Link)

Obaid T. Fadhil, Waleed M. Abed, "Experimental investigation on a pyramid solar still under Iraq climate conditions", AIP Conference Proceedings, vol. 3009, Issue 1, 2024.(Link)‏‏

Thabit, S. M., Abed, W. M., "Experimental and Numerical Convective Heat Transfer Investigation in Laminar Rectangular-Channel Flow across V-Shaped Grooves", Journal of Enhanced Heat Transfer, vol. 3, Issue 1, 2023.(Link)‏

Thabit, S. M., Abed, W. M., "Hydraulic-thermal analysis of laminar flows in a rectangular channel with 45°-inclined grooves",  In AIP Conference Proceedings (AIP Publishing LLC), Vol. 2400, No. 1, pp. 040009, 2022.(Link)

with 45°-Helical Ribs”, Anbar Journal of Engineering Sciences, Vol. 9, Issue 2, pp. 193-202, 2021.

W. M. Abed, A. Al-Damook, W. H. Khalil, "Convective Heat Transfer in an Annulus of Concentric and Eccentric Cylinders with an Inner Rotating Cylinder", International Journal of Heat and Technology, Vol. 39, No. 1, pp. 61-72, 2021.

W. M. Abed,  “Experimental Measurements of Thermal Conductivity for Non-Newtonian Polymeric Fluids Using a Concentric Cylindrical Cell Under Static Conditions”, International Journal of Thermophysics , Vol. 42, pp. 79, 2021. 

Mais K. Kareem, W. M. Abed, H. K. Dawood, “Numerical simulation of hydrothermal behavior in a concentric curved annular tube”, Heat Transfer, pp. 1–27, 2020.

W. M. Abed, A. F. Domingues, R. J. Poole, D. J.C. Dennis, “Heat transfer enhancement in a cross-slot micro-geometry”, International Journal of Thermal Sciences, Vol. 121, pp. 249-265, 2017.

W. M. Abed, R. D. Whalley, D. J. C. Dennis and R. J. Poole, “Experimental investigation of the impact of elastic turbulence on heat transfer in a square serpentine channel”, Journal of Non-Newtonian Fluid Mechanics, Vol. 231, pp. 68-78, 2016.

W. M. Abed, R. D. Whalley, D. J. C. Dennis and R. J. Poole, “Numerical and experimental investigation of heat transfer and fluid flow characteristics in a micro-scale serpentine channel”, International Journal Heat and Mass Transfer, Vol. 88, pp. 790-802, 2015.

R. D. Whalley, W. M. Abed, D. J. C. Dennis and R. J. Poole, “Enhancing heat transfer at the micro scale using elastic turbulence”, Theoretical & Applied Mechanics Letters 5, pp. 103-106, 2015.

W. M. Abed, M. A. Ahmed, “Numerical study of laminar forced convection heat transfer and fluid flow characteristics in a corrugated channel”, Journal of Engineering and Development, Vol. 14, No. 3, 2010.

W.M. Abed, “Pressure drop and heat transfer enhancement of turbulator inserted tubes: experimental work review”, The Iraqi Journal for Mechanical and Materials Engineering, 2010.

W.M. Abed, “Study of the effect of fins' shapes on natural thermal convection”, Al-Qadisiya Journal for Engineering Sciences AJES, Vol. 2, No. 2, 2009.

W.M. Abed, M.A. Ahmed, “Numerical study of natural convection in horizontal eccentric annulus”, Anbar Journal for Engineering Sciences AJES, Vol. 1, No. 2, 2008.

W.M. Abed, K.J. Al-Huraan, “Effect of some parameters on thermal performance of packed beds system”, Journal of science & Engineering, Iraq, 2004.

W.M. Abed, “Analysis of thermal performance for a V-corrugated plate solar air collector”, Journal of science & Engineering, Iraq, 2003.

المحاضرات العلمية

السلسل	المادة	اسم المحاضرة	المرحلة	التحميل	مشاهدة
1	نقل الحرارة المتقدمة للسيدة السلطة	References + Introduction	دراسات عليا
2	نقل الحرارة المتقدمة للسيدة السلطة	One-dimensional, Steady-State Condition	دراسات عليا
3	نقل الحرارة المتقدمة للسيدة السلطة	Heat Transfer from Extended Surfaces	دراسات عليا
4	نقل الحرارة المتقدمة للسيدة السلطة	Steady-State Two-Dimensional Conduction Heat Trans	دراسات عليا
5	نقل الحرارة المتقدمة للسيدة السلطة	Transient Conduction Heat Transfer	دراسات عليا
6	نقل الحرارة المتقدمة للسيدة السلطة	Radiation Heat Transfer	دراسات عليا
7	مكائن كهربائية	الفصل الأول - التدفق الهائل في القنوات	الثانية
8	مكائن كهربائية	الفصل 2 حركيات السوائل	الثانية
9	مكائن كهربائية	الفصل 3 برنولي والطاقة	الثانية
10	مكائن كهربائية	الفصل 4 تحليل الأبعاد	الثانية
11	مكائن كهربائية	الفصل 5 تدفق أناء الأنابيب	الثانية
12	مكائن كهربائية	المصادر	الثانية

الشهادات الاكاديمية

 2012- 2016, University of Liverpool, Liverpool, UK

PhD in Mechanical Engineering “Heat transfer enhancement in micro-scale geometries

Supervisors: Professor Robert J. Poole and Dr David J. C. Dennis

2000-2002, University of Technology, Baghdad, Iraq

M.Sc. in Mechanical Engineering / Power – Distinction

Dissertation Topic: “Effect of some operational parameters on the performance of solar driers

1994-1998, University of Anbar, Anbar, Iraq

B.Sc. in Mechanical Engineering – Merit

الاشراف

اخرى

The XVIIth International Congress on Rheology (ICR2016), Aug. 8 - 13, 2016, Kyoto, Japan, Poster (The enhancement of convective heat transfer in a cross-slot micro-geometry).

December 2015, The British of Society of Rheology - Midwinter Meeting 2015 - Microrheology & Microfluidics in Glasgow, United Kingdom, Poster (Heat transfer enhancement in a cross-slot micro-geometry).

April 2015, the 10th Annual European Rheology Conference (AERC) in Nantes, France, Presented (The effect of elastic turbulence on heat transfer in a square serpentine channel).

April 2014, the 9th Annual European Rheology Conference (AERC) in Karlsruhe, Germany, Poster (Elastic Turbulence and Heat Transfer).

April 2010, Second Materials & Mechanical Engineering Conference for University of Babylon-Iraq, Presented.

April 2009, First Mechanical Engineering Conference for University of Al-Qadisiya-Iraq, Presented.

April 2002, Second Mechanical Engineering Conference for University of Al-Kufa-Iraq, Presented.

Online Career Development Workshop, 27th October - 8th December 2014, Educational Development Division Centre for Lifelong Learning, University of Liverpool.

Making Academic Applications, 04/12/2014, Presenter: S. Beyer and S. Nicholson, Educational Development Division Centre for Lifelong Learning, University of Liverpool, Attended.

GTA Demonstrator Training workshop, 09/10/2013, Presenter: Christos Petichakis, Educational Development Division Centre for Lifelong Learning, University of Liverpool, Attended.

Viscous fluid flow course, Presenter: Professor Robert J. Poole, School of Engineering, University of Liverpool, Attended.

First-Year Development Workshop, 12th – 14th December 2012, PGR Development, University of Liverpool, Attended.