Staff Portal
Osama Ibrahim Abd Al-Jenabi (Lecturer)

MSc in Metallurgical Engineering
lecturer
Renewable Energy Research Center - Research Centers
oiabd@uoanbar.edu.iq

Biography

Osama Al-jenabi: received a B.Sc. in Production and Metallurgical Engineering Department from the University of Technology-Iraq in 2003, and an M.Sc. degree in Metallurgical Engineering from the University of Technology-Iraq in 2012. Since 2012, he has been working with the University of Anbar-Iraq, where he is a lecturer in the Mechanical Engineering department and also a researcher at the Renewable Energy Research Center (RERC). Osama participated in UMPEDAC Training Course in RENEWABLE ENERGY from 10th – 21st December 2012 at the University of Malaya (UM)-Malaysia. In addition, he completed the course “RE100: Introduction to Renewable Energy” on December 2014 at Solar Energy International (SEI). His research interests include materials and metallurgy, microstructural characterization, Semi-Solid processing, statistical analysis and modelling, PV efficiency, Solar Air Heaters (SAHs), and renewable energy resources. He published more than six papers in local and international journals.

Osama is currently doing his PhD in Energy materials at the Mechanical Engineering/University of Leeds.

Postgraduate Researcher Profile: https://eps.leeds.ac.uk/pgr/8599/osama-jenabi

 

 

 

Publication

  1. Abbas, A. K., K. W. Abid, O. I. Abd, Y. Al Mashhadany, and A. H. Jasim. 2021. "High Performance of Solar Panel Based on New Cooling and Cleaning Technique." Indonesian Journal of Electrical Engineering and Computer Science 24 (2): 803-814 (Link)..
  2. Abid, K. W., B. H. Sulaiman, O. I. Abd, and H. A. Rahman. 2020. "Study the Impact of the Ideality Factor and the Dust on the Performance of Solar Panels." Journal of Green Engineering 10 (6): 2615-2626 (Link). 
  3. Osama Ibrahim Abd, Nawal Ezzat Abdul-Latiff, Kadhum Ahmed Abed, “Optimization of Casting Conditions for Semi-Solid A356 Aluminum Alloy”, Anbar Journal Of Engineering Science©Vol 8 (2019) 44 – 53 (Link).
  4. H. K. Dawood, S. A. Mutlag, K. A. Abed and O. I. Abed, "Priority-Based Decision Support System (PBDSS) by Genetic Algorithm as a Tool for Network Problem," 2018 11th International Conference on Developments in eSystems Engineering (DeSE), 2018, pp. 306-311 (Link), 
  5. Younus Khalaf Jabur, Osama Ibrahim, Khaled Waleed and Mohamed kareem Mohamed,” Study of Tensile Strength and Hardness Property for PVC Reinforced with Fiber”, Elixir Appl. Chem. 125 (2018) 52391-52395 (Link).
  6. Zain alabdeen Hussein Obaid, Osama Ibrahim Abd,” Evaluating and Modelling of Parabolic Solar Cooker by RSM”, Kirkuk University Journal /Scientific Studies (KUJSS) Volume 13, Issue 3, (2018), 75-95. (Link)
  7. Kaleid Waleed Abid, Younis Khalaf, Osama Ibrahim, Mohammad Safar, Saygin Siddiq Ahmed, ”Performance Evaluation Of Harmonics On Power Quality: Case Study”, ISSN: 2602-294X - The International Journal of Energy and Engineering Sciences, Volume 1, Issue 1, (2016), 46-64. (Link)
  8. Kaleid Waleed Abid, Younis Khalaf, Ahmed Subhi, Osama Ibrahim, ”Practical Evaluation of Dust Effect on Photovoltaic Module Based on Solar Model Tester”, INTERNATIONAL ENERGY & ENGINEERING CONFERENCE TURKEY/Gaziantep, (2016). (Link)
  9. Osama Ibrahim Abd,”Taguchi Design of Manufacturing Condition for Semi-Solid Al-Si Alloy fabricated by Cooling Slope Plate method”, Elixir Mech. Engg. 81 (2015) 31714-31717, (Link)
  10. Mustafa Adil, Osama Ibrahim, Zainalabdeen Hussein, Kaleid Waleed, “Experimental Investigation of SAHs Solar Dryers with Zigzag Aluminum Cans”, International Journal of Energy and Power Engineering 2015; 4(5): (2015), 240-247. (Link)
  11.  Salih Mohammed Salih, Osama Ibrahim Abd, Kaleid Waleed Abid, “Performance Enhancement of PV Array Based on Water Spraying Technique”, International Journal of Sustainable and Green Energy. Special Issue: Engineering Solution for High Performance of Solar Energy System. Vol. 4, No. 3-1, (2015), 8-13. (Link)
  12.  Osama Ibrahim Abd, “Experimental Analysis on Metallic Foams-A Response Surface Methodology Approach”, International Journal of Engineering & Technology, 4 (1) (2015), 149-160. (Link)
  13.  Younis Khalaf,     Osama Ibraheem,  Mustafa Adil, Salih Mohammed, Mohammed Qasim, Khaled Waleed, “Maximum Power Point Evaluation Of Photovoltaic Modules Under Shading Effect”, European Scientific Journal, vol.10, No.9, (2014), 281-294. (Link)
  14.  Rajab Mohammed Hussein and Osama Ibrahim Abd,” Influence of Al and Ti Additions on Microstructure and Mechanical Properties of Leaded Brass Alloys”, Indian Journal of Materials Science, Volume 2014, Article  909506, (2014), 5 pages. (Link)
  15. Nawal Ezat and Osama Ibrahim, “Microstructure Investigation of Hypereutectic Al-Si Alloy Using Slope Plate Casting”, Engineering & Technology Journal, Vol. 31, No. 3A, (2013), 400-415. (Link)

Lectures


No. Subjects Lectures Stage File Video
1 Engineering of Metallurgy Lecture #1 - CLASSIFICATION OF MATERIALS Second
2 Engineering of Metallurgy Lecture #2 - CLASSIFICATION OF MATERIALS Second
3 Engineering of Metallurgy Lecture #3 - ATOMIC STRUCTURE Second
4 Engineering of Metallurgy Lecture #4- INTERATOMIC BONDING Second
5 Engineering of Metallurgy Lecture #5 - THE STRUCTURE OF CRYSTALLINE SOLIDS Second
6 Engineering of Metallurgy Lecture #6 -THE STRUCTURE OF CRYSTALLINE SOLIDS Second
7 Engineering of Metallurgy Lecture #7 - THE STRUCTURE OF CRYSTALLINE SOLIDS Second
8 Engineering of Metallurgy Lecture #8 - IMPERFECTIONS IN SOLIDS Second
9 Engineering of Metallurgy Lecture #9 - IMPERFECTIONS IN SOLIDS Second
10 Engineering of Metallurgy Lecture #10 - PHASE DIAGRAMS Second
11 Engineering of Metallurgy Lecture #11 - PHASE DIAGRAMS Second
12 Engineering of Metallurgy Lecture #12 - The Iron–Iron Carbide Phase Diagram Second
13 Engineering of Metallurgy Lecture #13 - FERROUS ALLOYS Second
14 Engineering of Metallurgy Lecture #14 - CAST IRON Second
15 Engineering of Metallurgy Lecture #15 - NONFERROUS ALLOYS Second
16 Engineering of Metallurgy Lecture #16 - Kinetics and Heat Treatments in Meta Second
17 Engineering of Metallurgy Lecture #17 - Heat Treatments for Metal Products Second

Other

Current Membership in Professional Societies:

  • Member, Iraqi Society of Engineers.
  • Member, Iraqi Society of University Teachers.
  • Member of the administration committee of Renewable Energy Research Center, University of Anbar: Ramadi, Al Anbar, IQ.
  • Member of the committees for examination and emphasis in Renewable Energy Research Center, University of Anbar: Ramadi, Al Anbar, IQ.

Experience

  1. In College of Engineering, University of Anbar: Ramadi, Al Anbar, IQ.
  • Trainer in Engineering Workshops.
  • Assist. Lecturer in Department of Mechanical Engineering, for Engineering Drawing, and labs of Metallurgy and CAD.
  • Lecturer in Department of Mechanical Engineering, for:
  • Engineering Drawing (2nd semester 2017/2018)
  • Mechanical Drawing (1st semester 2018/2019)
  • Engineering of Metallurgy (2nd semester 2018/2019)
  • Lab of AutoCAD (1st semester 2018/2019)
  • Lab of Metallurgy (2nd semester 2018/2019)
  • Supervision on graduation Project for Mechanical Engineering students.
  • Supervision on graduation Project (study the performance of Hydrogen cell) at Mechanical Engineering department (2018/2019).
  • Directed and interactive discussion sessions laboratory for undergraduate Metallurgy and CAD Laboratories.
  • Employee and Responsible on office of scientific affairs and higher studies in College of Engineering.
  1. In Renewable Energy Research Center, University of Anbar: Ramadi, Al Anbar, IQ.
  • Researcher in Renewable Energy Research Center
  • Manager of Department of Electrical Power Systems.
  • Member of the administration committee.
  • Supervision, as one of project team on graduation Project for a mechanical engineering student titled "Experimental investigation of Solar Air Heaters consisting of Aluminum cans".
  • Performing all lab experiments related with evaluating of pollution impact on performance of PV array.
  • Performing lab experiments related with Impressed Current Cathodic Protection (ICCP) of buried steel structure.
  • Participating in Workshop (2013) (In Arabic): Use of renewable energy in Iraq from the point of view of young people with Tammuz Organization for social Development, Iraq.

Technical Skills

  • Microsoft Office (Word, Excel and Power point).
  • AutoCAD.
  • Statistical Analysis, ANOVA and Modelling.
  • Design of Experiments and Optimization.
  • Minitab and Design Expert Software.
  • Destructive Inspection.

Training Courses and Certificates

Training Courses outside of Iraq:

  • UMPEDAC Training Course (2012): Renewable Energy on 10th-21st December 2012 at University of Malaya Kuala Lumpur, Malaysia.
  • UNDP Workshop (2013) Road Map for Energy Efficiency in Iraq on 2-5 December 2013, Amman, Jordan.
  • Online Training course (2014): RE100: Introduction to Renewable Energy on December 2014 at Solar Energy International (SEI).

Training Courses inside of Iraq:

  • Training Course (2009):  Modern Applications in Destructive Inspections, University of Technology: Baghdad, Baghdad, IQ.
  • Computer Rehabilitation Program (2010) at Computer of College, University of Anbar: Ramadi, Al Anbar, IQ.   
  • Educational qualification course (2012) at Teaching Methods and Continuous Education Center, University of Anbar: Ramadi, Al Anbar, IQ.
  • Corrections in Arabic language (2018) at Teaching Methods and Continuous Education Center, University of Anbar: Ramadi, Al Anbar, IQ.
  • Computer Rehabilitation Program (2018) at Center of Computer, University of Anbar: Ramadi, Al Anbar, IQ.

Websites:

  1. http://orcid.org/0000-0002-5300-4326
  2. http://scholar.google.com/citations?user=yk6qHEQAAAAJ&hl=en
  3. https://www.researchgate.net/profile/Osama_Ibrahim18
  4. https://www.facebook.com/M.Eng.Osama
  5. https://publons.com/researcher/1700624/osama-ibrahim/
  6. http://www.researcherid.com/rid/D-9342-2019
  7. https://www.linkedin.com/in/osamaaljenabi/
  8. https://al-anbar.academia.edu/OsamaAljenabi